D-Link NUCLIAS CONNECT Скачать руководство пользователя страница 23

Страница: 23 / 96

D-Link DAP-X2810 User Manual

Section 3 - Configuration

Performance

On the Performance Settings page the users can configure more advanced settings concerning the wireless signal and hosting.

Wireless Band:

Wireless:

Wireless Mode:

Data Rate*:

Beacon Interval (40-500):

DTM Interval (1-15):

Select either 2.4GHz or 5GHz.

Use the drop-down menu to turn the wireless function On or Off.

The different combination of clients that can be supported include

Mixed 802.11b/g/n mode, Mixed 802.11b/g mode, 802.11n Only

mode, and Mixed 802.11ax mode in the 2.4 GHz band and Mixed

802.11a/n, 802.11a Only mode, 802.11n Only mode, Mixed 802.11ac

mode and Mixed 802.11ax mode in the 5 GHz band. Please note that

when backwards compatibility is enabled for legacy (802.11a/g/b)

clients, degradation of 802.11n wireless performance is expected.

Indicate the base transfer rate of wireless adapters on the wireless

LAN. The AP will adjust the base transfer rate depending on the base

rate of the connected device. If there are obstacles or interference, the

AP will step down the rate. This option is enabled in Mixed 802.11b/g

mode (for 2.4 GHz) and 802.11a only mode (for 5 GHz). The choices

available are Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6 for 5 GHz and

Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1 for 2.4 GHz.

Beacons are packets sent by an access point to synchronize a

wireless network. Specify a value in milliseconds. The default (100)

is recommended. Setting a higher beacon interval can help to save

the power of wireless clients, while setting a lower one can help a

wireless client connect to an access point faster.

Select a Delivery Traffic Indication Message setting between 1 and 15. 1 is the default setting. DTIM is a countdown informing

clients of the next window for listening to broadcast and multicast messages.

Содержание NUCLIAS CONNECT

































































































Результаты поиска

Содержание NUCLIAS CONNECT

Отзывы:

Похожие инструкции для NUCLIAS CONNECT

Бренды по названию

Популярные бренды

D-Link NUCLIAS CONNECT, Руководство пользователя

Результаты поиска

Содержание NUCLIAS CONNECT

Отзывы:

Похожие инструкции для NUCLIAS CONNECT

Бренды по названию

Популярные бренды