![background image](http://html1.mh-extra.com/html/d-link/nuclias-connect/nuclias-connect_user-manual_3469379013.webp)
13
D-Link DAP-X2810 User Manual
Section 3 - Configuration
Wireless Band:
Mode:
Network Name (SSID):
Auto Channel Selection:
Channel:
Channel Width:
Select either
2.4GHz
or
5GHz
from the drop-down
menu.
WDS with AP mode is selected from the drop-down
menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID’s factory default setting is
dlink
. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
with AP mode. The channel selection process only
occurs when the AP is booting up.
All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection. (Note: The
wireless adapters will automatically scan and match
the wireless settings.)
Allows you to select the channel width you would
like to operate in 2.4GHz and 5GHz. Use the drop-
down menu to choose 20 MHz or Auto 20/40 MHz
or Auto 20/40/80 MHz.
WDS with AP Mode