D-Link DAP-2622 User Manual
14
Wireless Band:
Operation Mode:
Network Name (SSID):
Auto Channel Selection:
Channel:
Channel Width:
Select either
2.4GHz
or
5GHz
from the drop-down
menu.
WDS with AP
mode is selected from the drop-down
menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID’s factory default setting is
dlink
. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
with AP mode. The channel selection process only
occurs when the AP is booting up.
All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection. (
Note
: The
wireless adapters will automatically scan and match
the wireless settings.)
Click the drop-down menu to select
20 MHz, Auto
20/40 MHz
or
Auto 20/40/80 MHz
. Select
20 MHz
if you are not using any 802.11n wireless clients.
Auto 20/40 MHz
allows you to connect to both
802.11n and 802.11b/g or 802.11a wireless devices
on your network.
WDS with AP Mode
