8
D-Link DNR-202L User Manual
Section 2: Assembly and Installation
Assembly and Installation
Attaching External Drives
3
Step 1
Place the NVR on a non-slip lat surface.
Step 3
Attach one end of the provided RJ45 network cable to the NVR. Attach the other end to your
network. The DNR-202L will test for an Internet connection. Once an Internet connection is
established, the blue LED will blink.
Note:
If you do not connect an Ethernet cable, the DNR-202L will beep.
Step 2
Attach an external USB HDD to the USB HDD1 port.
The NVR will mount the HDD and beep once.
Note
: When you want to remove an HDD, press and hold the release button for at least three
seconds. The NVR will release the HDD and emit a long beep. You can now unplug the USB cable.
2
4
Step 4
Attach the provided power adaptor.
