D-Link KVM-440 Скачать руководство пользователя

Страница: 7 / 55

D-Link KVM-440/450 User Manual

Section 1 - Product Overview

Features

The KVM-440/450 is designed for easy installation and features on-screen display providing clear and easy navigation:

• Connect your console keyboard/mouse via PS/2.

• Connect computers via PS/2 and/or USB.

• Supports Windows, Linux, Mac OS9/OSX, and Sun Microsystems Operating Systems.

• On-Screen-Display (OSD) & Cascade Chain functions.

• Intuitive on-screen menus for quick and efficient navigation.

• Three level password access: Administrator, User and Viewer.

• Supports daisy chaining with up to 3 cascade levels. Cascaded units do not require a special configuration.

• Emulates a PS/2 or USB keyboard on each PC allowing them to boot normally without a keyboard error.

• Supports hot-plugging: All computers connected to the KVM switch can be added or removed at any time

without shutting down the KVM switch.

• Supports 3 switching methods:

- Front Panel Button
- Hot-Keys on a PS/2 keyboard
- OSD Menu (On Screen Display)

Содержание KVM-440
























































Результаты поиска

Содержание KVM-440

Отзывы:

Похожие инструкции для KVM-440

Бренды по названию

Популярные бренды

D-Link KVM-440, Руководство по эксплуатации продукта

Результаты поиска

Содержание KVM-440

Отзывы:

Похожие инструкции для KVM-440

Бренды по названию

Популярные бренды