manualshive.com logo in svg

D-Link KVM-440, Руководство по эксплуатации продукта

Поделиться
Скачать
D-Link KVM-440 Скачать руководство пользователя страница 16

16

D-Link KVM-440/450 User Manual

Section 2 - Installation

Cascade.Chaining

The KVM switch supports cascades of up to 3 levels. Control up to 64/256/4096 PCs from a single console. Cascaded units do not 

require any special configuration Once connected, the KVM Switches will automatically configure themselves appropriately 

as the Master or Slave.

To install a cascade chain, please follow the instruction below.

A. Power off any attached computers/devices before installing the KVM Switch.

B. Use the 4-in-1 KVM combo cable (See Figure 6) to connect one or more Slave KVM Switches to any PC port on the Master 

KVM Switch. The KVM to KVM must be connected through a PS/2 connection. (Please refer to Figure 7 & Figure 8).

 

C.  Plug in the power adapter for the first level Master KVM Switch and connect the Master KVM switch to computers.

D. Plug in the power adapter for each level Slave KVM Switch and connect the Slave KVM switch to computers. 

E. The power on sequence should be:

1. Master KVM Switch.

2. Second level Slave KVM Switch (connected to Master KVM Switch) if needed.

3. Third level Slave KVM Switch (connected to second level Slave KVM Switch) if needed.

4. All computers connected to Master/Slave KVM Switch.

Initial.Plug-in.Process:

Please plug in the Master KVM Switch first before turning on any other devices like monitor or computers.

Hot.plugging.and.hot.swapping:

The KVM switch supports hot plugging and hot swapping.

Содержание KVM-440
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды