48
D-Link DNR-2020-04P User Manual
Section 3 - Configuration
PoE Status
You can check the status of the PoE ports (P1-P4) on the NVR from this page.
Link Status: Displays the status of the Ethernet connection
Link
A network connection is established.
Unlink
There is no network connection.
PoE Consumption: Displays the status of the PoE port
15W
The camera’s maximum power consumption is 15 watts.
7W
The camera’s maximum power consumption is 7 watts.
4W
The camera’s maximum power consumption is 4 watts.
0W
PoE is not actively providing power.
N/A
PoE is not supported.
Overload
The total PoE power consumption is above 45 watts. Power
provision has stopped.
Overcurrent
The camera’s power consumption is beyond the PoE class limit.
Power provision has stopped.
Total PoE
Power
Consumption
The NVR can supply a total of 45 watts via PoE.
