•
Destination port address
For source or destination IP address, you can define a single IP address
(e.g., 4.3.2.1) or a range of IP addresses (e.g., 4.3.2.1-4.3.2.254). An empty
fields implies all IP addresses.
For source or destination port, you can define a single port (e.g., 80) or a
range of ports (e.g., 1000-1999).
Each rule can be enabled or disabled individually.
Inbound Filter:
To enable the
Inbound Packet Filter,
click the check box next to
Enable
in
the
Inbound Packet Filter
field.
Outbound Firewall:
(to access the Outbound Filter, click
Outbound
Firewall
at the bottom of the window.)
To enable the
Outbound Packet Filter
click the check box next to
Enable
in
the
Outbound Packet Filter
field.
Follow the same procedure as for the Inbound Firewall. The IP addresses
that you input will be blocked from the port activity that you input (e.g.,
browsing the internet, receiving mail etc.)
After
Outbound Packet Filter
setting is configured, click the
Apply
button.