D-Link ENW-3503, Руководство пользователя

Страница: 60 / 64

Appendix C
LAN + Fax/ Modem PC Card 8-12
81 CONNECT 54000 EC* v
82 CONNECT 56000 v
82 CONNECT 56000 EC* v
86 CONNECT 16800 v
86 CONNECT 16800 EC * v
87 CONNECT 115200 v
87 CONNECT 115200 EC * v
*: EC is replaced by one of the following symbols.
V.42bis
V.42 error control and V.42bis data compression
V.42 V.42 error control only
MNP5 MNP 4 error control and MNP 5 data compression
MNP4 MNP 4 error control only
NoEC No error control and data control protocols
8.8. S-Registers, "ATSn=x"
Register
Dec. Function & Description Deft.
S0=
0-255 Set the number of the rings required
before the modem automatically answers
a call. Set "S0=0" to disable auto-answer
mode 000
S1= 0-255 Count the incoming rings and store the
value to this register. The value of this
register is incremented with each ring. If
no rings occur over an 8 sec. interval, this
register is cleared. User can read but
should not change this value 000
S2=
0-255 S2 holds the decimal value of the ASCII
character used as the escape character.
The default value (043) corresponds to an
ASCII character "+". A value of 128 to 255
disables the escape process, i.e., no
escape character will be recognized 043
S3= 0-127 Hold the decimal value of the Carriage 013