49
D-Link M15 User Manual
Section 3 - Configuration
Network
This section will allow you to change the local network settings of the M15
and configure the DHCP settings. Go to
Settings > Network
to access this
configuration page. Click
Advanced Settings...
to expand the configuration
items.
Network Settings
LAN IP Address
Enter the IP address of the device. The default IP address is
192.168.0.1
. If you change the IP address, once you click
Save
, you
will need to enter the new IP address in your browser to get back into
the configuration utility.
Subnet Mask
Enter the subnet mask of the device. The default subnet mask is
255.255.255.0
.
Management
Link
The default address to access the device’s configuration is
http://M15-
xxxx
.local/ (where xxxx represents the last 4 digits of
your device's MAC address). You can replace M15-xxxx with a name
of your choice.
Local Domain
Name
Enter the domain name (optional).
Enable DNS
Relay
Disable this option to transfer the DNS server information from your
ISP to your computers. If enabled, your computers will use the device's
settings for DNS service (refer to Primary and Secondary DNS Server
settings for each Internet connection type).