D-Link DXS-3610 Series страница 12 Скачать руководство пользователя

Страница: 12 / 57

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide

Installation

Installation Guidelines

Installing the Switch without a Rack

Installing the Switch in a Standard 19" Rack

Installing Transceivers into the Transceiver Ports

Installing PSU Modules into the PSU Module Slots

Installing Fan Modules into the Fan Module Slots

Installation Guidelines

This section will discuss the hardware installation guidelines that the user must follow in order to properly and safely

install this switch into the appropriate environment.

•

Visually inspect the power cord and see that it is fully secured to both the power connector, on the Switch, and

the electrical outlet that supplies power.

•

Install the Switch in a fairly cool and dry place within the acceptable operating temperature and humidity

ranges. For more information about the acceptable operating temperature and humidity ranges, refer to the

Physical and Environmental section.

•

Install the Switch in a site free from strong electromagnetic field generators such as motors, vibration, dust, and

direct exposure to sunlight.

Installing the Switch without a Rack

This section is used to guide the user through installing the Switch in an area other than a switch rack. Attach the

included rubber feet to the bottom of the Switch. Take note that there should be marked blocks on the bottom of the

Switch to indicate where to attach the rubber feet. These markings are usually found in each corner on the bottom of

the device. The rubber feet cushion the Switch, protecting the casing from scratches and preventing it from scratching

other surfaces.

Figure 3-1 Attaching rubber feet to the Switch

Install the Switch on a sturdy, level surface that can support the weight of the Switch. Do not place any heavy objects

on the Switch. The power outlet should be within 1.82 meters (6 feet) of the Switch. Make sure that there is proper

Содержание DXS-3610 Series


























































Результаты поиска

Содержание DXS-3610 Series

Отзывы:

Похожие инструкции для DXS-3610 Series

Бренды по названию

Популярные бренды

D-Link DXS-3610 Series, Руководство по установке оборудования

Результаты поиска

Содержание DXS-3610 Series

Отзывы:

Похожие инструкции для DXS-3610 Series

Бренды по названию

Популярные бренды