D-Link DXS-3610 Series страница 21 Скачать руководство пользователя

Страница: 21 / 57

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Hardware Installation Guide

Installing Fan Modules into the Fan Module Slots

This section guides the user through installing fan modules into the fan module slots. On the rear panel of the Switch,

there are five fan module slots. Front-to-Back (FB) or Back-to-Front (BF) fan modules can be installed in these slots.

By default, the Switch is shipped with five

DXS-FAN200

modules pre-installed.

NOTE:

The fan modules support a specific airflow direction. This airflow direction must be the same as

the PSU module(s) installed. The default airflow direction is front-to-back on all the installed PSU

modules and fan modules.

To remove an existing fan module, use a flat-head screwdriver to unscrew the lag bolt (with a slot drive head) and

gently pull the fan module out of the fan module slot.

Insert the new fan module into the fan module slot and fasten the lag bolt to secure the fan module into place.

Figure 3-13 Installing a Fan Module

Содержание DXS-3610 Series


























































Результаты поиска

Содержание DXS-3610 Series

Отзывы:

Похожие инструкции для DXS-3610 Series

Бренды по названию

Популярные бренды

D-Link DXS-3610 Series, Руководство по установке оборудования

Результаты поиска

Содержание DXS-3610 Series

Отзывы:

Похожие инструкции для DXS-3610 Series

Бренды по названию

Популярные бренды