D-Link DXS-3600-16S, Быстрое руководство по установке

Страница: 12 / 27

First Time Connecting to the Switch
Upon initial connection to the Switch, the login screen appears (see example below).
By default, there is no Username and Password configured in the account settings of this switch. This will
allow the user to simply connect to this Switch for the first time by pressing the
Enter key. After pressing
Enter, access will be given to enter commands after the command prompt ( Switch> ) appears.
NOTE: the first user automatically gets Administrator level privileges. At least one Admin-level user account
must be created for the Switch.
Logging onto the Web Manager
To access the Web User Interface the user simply runs the standard web browser and enter the Switch’s IP
address into the address bar of the browser and press the
Enter key. By default, the Management port,
located just above the Console port, can be accessed using the IP address of 192.168.0.1/24.
To access any of the other normal LAN ports, other than the Management port, the user needs to configure
an IP address for this interface first before it can be accessed via the Web User Interface.
The PC must have an IP address in the same subnet as the switch. For example, if the switch has an IP
address of 10.90.90.90, the PC should have an IP-address of 10.x.y.z (where x/y is a number between
0 ~ 254 and z is a number between 1 ~ 254), and a subnet mask of 255.0.0.0. Open the web browser and
enter 10.90.90.90 (the factory-default IP address) in the address bar. Then press <
Enter >.
NOTE: To be able to connect to the Web User Interface, a user account must be created first using the
Command Line Interface. By default, there are no user accounts configured on this Switch.
12