manualshive.com logo in svg

D-Link DXS-3250 - xStack Switch - Stackable, Руководство CLI

Поделиться
Скачать
D-Link DXS-3250 - xStack Switch - Stackable Скачать руководство пользователя страница 205

D-Link CLI Reference Guide

Page 204 

Section 17. Port Monitor Commands

port monitor

The 

port monitor 

Interface Configuration mode command starts a port monitoring session. To stop a port 

monitoring session, use the 

no

 form of this command.

Syntax

port monitor

 

src-interface [rx | tx]

no port monitor

 

src-interface

Parameters
•

src-interface—

Valid Ethernet port. (Full syntax: 

unit/port

)

•

rx—

Monitors received packets only.

•

tx—

Monitors transmitted packets only.

Default Configuration

Monitors both received and transmitted packets.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

This command enables traffic on one port to be copied to another port, or between the source port (src-interface) 
and a destination port (port being configured).

The following restrictions apply to ports configured as destination ports:

The port cannot be already configured as a source port.

The port cannot be a member in a port-channel.

An IP interface is not configured on the port.

GVRP is not enabled on the port.

The port is not a member of a VLAN, except for the default VLAN (will automatically be removed from the default 
VLAN). 

The following restrictions apply to ports configured to be source ports:

The port cannot be already configured as a destination port.

Example

The following example copies traffic on port 1/7 (source port) to port 1/1 (destination port).

Console(config)# 

interface ethernet

 1/1

Console(config-if)# 

port monitor

 1/7

Содержание DXS-3250 - xStack Switch - Stackable



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды