DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
6
100~240VAC at 50~60Hz.
In addition, an optional external Redundant Power Supply (
DPS-200
for the
DWS-3124-24TC
and
DPS-700
for the
DWS-3124-24PC
) can be plugged into the connector displayed above. When the internal power fails, this optional
external RPS will take over all the power immediately and automatically.
In the event that a power failure might occur in the environment and no UPS is used, as a precaution, unplug the
power cord from the Switch. After the return of power, you can plug the power cord back into the Switch’s power
connector.
Side Panel Description
The Side panel of the Switch consists out of heat and fan vents that are used to dissipate heat. Do not block these
openings. Leave at least 4 inches of space at the rear and sides of the Switch for proper ventilation. Be reminded that
without proper heat dissipation and air circulation, system components might overheat, which could lead to system
failure or even severely damage components.
Figure 1- 7. Side panels of the DWS-3160-24TC
Figure 1- 8. Side panels of the DWS-3160-24PC