manualshive.com logo in svg

D-Link DWS-3024L, Руководство пользователя

D-Link DWS-3024L - сетевой управляемый коммутатор, обеспечивающий эффективное управление сетью. Ползуйтесь User Manual для настройки и оптимизации работы устройства. Скачайте его бесплатно с manualshive.com и получите подробные инструкции по использованию. Увеличьте производительность своей сети с помощью этого надежного устройства.

Поделиться
Скачать
background image

Limited Warranty    239

   Limited Warranty (USA Only)

What You Must Do For Warranty Service:

Registration Card. The Registration Card provided at the back of this manual must be 
completed and returned to an Authorized D-Link Service Office for each D-Link product 
within ninety (90) days after the product is purchased and/or licensed. The addresses/
telephone/fax list of the nearest Authorized D-Link Service Office is provided in the back of 
this manual. FAILURE TO PROPERLY COMPLETE AND TIMELY RETURN THE 
REGISTRATION CARD MAY AFFECT THE WARRANTY FOR THIS PRODUCT.

Submitting A Claim. Any claim under this limited warranty must be submitted in writing 
before the end of the Warranty Period to an Authorized D-Link Service Office. The claim must 
include a written description of the Hardware defect or Software nonconformance in sufficient 
detail to allow D-Link to confirm the same. The original product owner must obtain a Return 
Material Authorization (RMA) number from the Authorized D-Link Service Office and, if 
requested, provide written proof of purchase of the product (such as a copy of the dated 
purchase invoice for the product) before the warranty service is provided. After an RMA 
number is issued, the defective product must be packaged securely in the original or other 
suitable shipping package to ensure that it will not be damaged in transit, and the RMA 
number must be prominently marked on the outside of the package. The packaged product 
shall be insured and shipped to Authorized D-Link Service Office with all shipping costs 
prepaid. D-Link may reject or return any product that is not packaged and shipped in strict 
compliance with the foregoing requirements, or for which an RMA number is not visible from 
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and 
return shipping charges for any product that is not packaged and shipped in accordance with 
the foregoing requirements, or that is determined by D-Link not to be defective or non-
conforming.

What Is Not Covered

This limited warranty provided by D-Link does not cover:

•

Products that have been subjected to abuse, accident, alteration, modification, tampering, 
negligence, misuse, faulty installation, lack of reasonable care, repair or service in any 
way that is not contemplated in the documentation for the product, or if the model or serial 
number has been altered, tampered with, defaced or removed;

•

Initial installation, installation and removal of the product for repair, and shipping costs;

•

Operational adjustments covered in the operating manual for the product, and normal 
maintenance;

•

Damage that occurs in shipment, due to act of God, failures due to power surge, and 
cosmetic damage;

•

Any hardware, software, firmware or other products or services provided by anyone other 
than D-Link.

Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED 
HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF 
ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-
INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY 
TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED 
WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY 

Содержание DWS-3024L













































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWS-3024L

Ubiquiti NanoStation M2 Quick Start Manual preview
NanoStation M2
Бренд: Ubiquiti Страницы: 16
Ubiquiti UAP-PRO Quick Start Gude preview
UAP-PRO
Бренд: Ubiquiti Страницы: 24
Ubiquiti AirRouter User Manual preview
AirRouter
Бренд: Ubiquiti Страницы: 38
Ubiquiti UF-Nano Quck Start Gude preview
UF-Nano
Бренд: Ubiquiti Страницы: 14
Ublox TOBY-R2 Series System Integration Manual preview
TOBY-R2 Series
Бренд: Ublox Страницы: 151
Ubiquiti NB?2G18 Installation Manual preview
NB?2G18
Бренд: Ubiquiti Страницы: 2
Moxa Technologies AirWorks AWK-3131-RCC Series User Manual preview
AirWorks AWK-3131-RCC Series
Бренд: Moxa Technologies Страницы: 78
MeshLinx MWI-5000 User Manual preview
MWI-5000
Бренд: MeshLinx Страницы: 94
NETGEAR WGR612 - 54 Mbps Wireless Router Datasheet preview
WGR612 - 54 Mbps Wireless Router
Бренд: NETGEAR Страницы: 2
Eminent EM4630 User Manual preview
EM4630
Бренд: Eminent Страницы: 16
EE Bright Box Quick Start Manual preview
Bright Box
Бренд: EE Страницы: 2
TRENDnet TEW-740APBO User Manual preview
TEW-740APBO
Бренд: TRENDnet Страницы: 93
Cambium Networks cnPilot E410 Indoor Hardware Installation Manual preview
cnPilot E410 Indoor
Бренд: Cambium Networks Страницы: 52
Billion 64 series Configuration Manual preview
64 series
Бренд: Billion Страницы: 15
Draytek VigorAP 1000C Quick Start Manual preview
VigorAP 1000C
Бренд: Draytek Страницы: 18
Accton Technology WA6102X User Manual preview
WA6102X
Бренд: Accton Technology Страницы: 107
Cyberoam NetGenie NG11EH Quick Start Manual preview
NetGenie NG11EH
Бренд: Cyberoam Страницы: 16
EnGenius ECB600 Quick Installation Manual preview
ECB600
Бренд: EnGenius Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды