DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Creating Wired WAN Connection
This configuration step is available for the
ADSL
,
VDSL
,
Ethernet (WAN)
,
Ethernet (LAN)
,
and
Wi-Fi
modes.
!
You should configure your WAN connection in accordance with data provided by your
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the
Internet connection type
page, from the
Connection type
list, select the
connection type used by your ISP and fill in the fields displayed on the page.
2. Specify the settings necessary for the connection of the selected type.
3.
For the
VDSL
,
Ethernet (WAN)
,
Ethernet (LAN)
modes
: If your ISP uses MAC address
binding, select the
Clone MAC address of your device
checkbox.
4.
For the
VDSL
,
Ethernet (WAN)
,
Ethernet (LAN)
modes
: If the Internet access is
provided via a VLAN channel, select the
Use VLAN
checkbox and fill in the
VLAN ID
field.
5.
For the
ADSL
mode
: Specify the VPI and VCI values in the relevant fields.
6. Click the
NEXT
button to continue or click the
BACK
button to return to the previous page.
Page
46
of 266