DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Alarm Clock
On the
VoIP / Alarm Clock
page, you can configure the phones connected to the FXS ports of the
router as alarm clocks.
Figure 173. The
VoIP / Alarm Clock
page.
In the
Line 1
and/or
Line 2
section, move the
Enable
switch to the right. Then specify the time at
which the phone should ring in the
Hour
and
Minutes
fields. In the
Ring time
field, specify the
signal duration. Then click the
APPLY
button.
!
When the
router
is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Inter
net. If you have set the system time
manually, you need to set the time and date again.
Page
228
of 266