DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
In the
Abbreviated Dial
section, you can assign short numbers (as a rule, such numbers consist of
two or three digits) to frequently used phone numbers. To do this, click the
ADD
button (
). In
the opened window, enter a short number in the
Source number
field, then enter the actual phone
number in the
Destination number
field. Click the
SAVE
button. Also in the
Destination
number
field you can specify a number in the format
phone_number@IP_address
for direct
IP calls bypassing the SIP proxy server.
To change a short or actual phone number, select of the relevant line in the table. In the opened
window, change needed parameters and click the
SAVE
button.
To remove a phone number, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
).
To use a number specified in the
Abbreviated Dial
section, dial the needed short number on the
phone set.
In the
Dialplan Settings
section, you can configure the dial plan for VoIP. To do this, move the
Use dialplan
switch to the right and in the
Dialplan
field displayed, specify the needed rule. You
can specify several rules separated by the character
|
(vertical bar). You can use digits (0-9), the
characters * (asterisk) and # (pound), and the following characters:
Parameter
Description
[]
Digits and/or the characters * and # within square brackets specify a
range of values for a certain position in the number.
X
Any digit, the character * or #.
.
Any number of repetitions (including none) of the previous digit or
character.
<>
Angle brackets containing digits separated by : (colon) allow to
substitute the digit after the colon for the digit before the colon.
In the
Misc
section, fill in the
PIN code to dial
field to allow the user of the phone to make calls
only after dialing the PIN code.
When all needed settings are configured, click the
APPLY
button.
Page
219
of 266
