51
D-Link DWR-978 User Manual
Section 4 - Connecting to a Wireless Network
Connect a Wireless Client to your Router
WPS Button
Step 2
- Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process).
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters,
media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to
connect to the DWR-978 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to
enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the DWR-978 for about 6 seconds. The WLAN LED on the front will start to blink.
Step 3
- Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected and your wireless
connection will be encrypted with WPA2.
WPS Button
