background image

2

D-Link DWP-902 Quick Install Guide

EN

G

LI

SH

Important Information

This product should ONLY be installed by 

an experienced installer who is familiar with 

local building and safety codes and, where 

applicable, is licensed by the appropriate 

authorities. Failure to employ an experienced 

installer may render the D-Link product 

warranty void and may also expose the end 

user or the service provider to legal and 

financial liabilities. D-Link and its resellers or 

distributors expressly disclaim any and all 

liabilities for injury, damage, or violation of 

regulations due to the improper installation of 

outdoor units or antennas.

A safety grounding system is necessary 

to protect your outdoor installation from 

lightning strikes and the build-up of static 

electricity. Direct grounding of an outdoor AP 

is very important and can help protect your 

networks from brutal outdoor environments 

and devastating ESD attacks. The grounding 

system must comply with electrical codes and 

safety standards that apply in your country 

and/or region. Always check with a qualified 

electrician if you are in doubt as to whether 

your outdoor installation is properly grounded.

Quick Install Guide

This installation guide provides basic 

instructions for installing the DWP-902 

Outdoor Internet Antenna on your network. 

For additional information about how to use 

the Access Point, please see the datasheet and 

user manual from the D-Link support website.

Minimum System 

Requirements

 

-

Computer with Windows, MAC OS, or 

Linux-based operating system, and an 

Ethernet adapter installed

 

-

Internet Explorer 7.0, Mozilla Firefox® 

version 12.0, Safari 4.0, or Chrome 20.0 or 

newer

 

-

A home router, switch, or Wi-Fi access point

Package Contents

 

-

DWP-902 Outdoor Internet Antenna

 

-

Grounding Wire

 

-

Grounding Screw (M4x0.7)

 

-

Quick Installation Guide

 

-

Mounting kit (Pole Mount)

 

-

Articulation Pole x1

 

-

T-Form Bracket x1

 

-

M5x16 Screw x4

 

-

M6x60 Screw Bolts x2

 

-

M8x40 Screw bolt x1

 

-

M8 Nut x1

 

-

Washer (M8 x 1, M6 x 2, M5 x 4)

 

-

Spring Washer (M8 x 1, M6 x 2, M5 x4)

 

-

W-Bar x1

 

-

PoE Injector DPE-301G1

 

-

Power Adapter (54 V/ 0.6 A)

1

 

-

RJ-45 Ethernet cable

 

-

Warranty Card

 

-

GPL Sheet

If any of the above items are missing, please 

contact your reseller.

1

  Using a power supply with a different voltage rating or PoE 

injector than the one included with the DWP-902 may cause 

damage and void the warranty for this product.

Содержание DWP-902









Отзывы: