6
D-Link Systems, Inc.
DWL-G820 Install Guide
Hardware Installation
The Ethernet port on the DWL-G820 is Auto MDI/MDI-X.
Meaning you can use a straight-through or crossover cable to
the Ethernet Port.
A. Connect the power adapter to the Power Receptor on the rear
panel of the DWL-G820 and then plug the other end to a wall
outlet or power strip. The power LED will turn on to indicate
proper operation.
Installing the DWL-G820
If you do not have a D-Link
®
Wireless Router or Access Point
that is using the default SSID and channel settings, please
complete the steps in section
Using the Setup Wizard
before
proceeding.
B. Insert one end of the Ethernet cable (included) to the Ethernet
port on the rear panel.
