background image

Professional installation instruction
Please be advised that due to the unique function supplied by this product, the device is 
intended for use with our interactive entertainment software and licensed third-party only. The 
product will be distributed through controlled distribution channel and installed by trained 
professional and will not be sold directly to the general public through retail store.

1. 

Installation personal 
This product is designed for specific application and needs to be installed by a qualified 
personal who has RF and related rule knowledge. The general user shall not attempt to 
install or change the setting.

2. 

Installation location  
The product shall be installed at a location where the radiating antenna can be kept 23.2 
cm from nearby person in normal operation condition to meet regulatory RF exposure 
requirement.

3. 

External antenna  
Use only the antennas which have been approved by the applicant. The non-approved 
antenna(s) may produce unwanted spurious or excessive RF transmitting power which may 
lead to the violation of FCC/IC limit and is prohibited.

4. 

Installation procedure  
Please refer to user’s manual for the detail.

5. 

Note to the installer:  
To comply with the FCC U-NII Band 1 above 30-degree EIRP emission limit (21 dBm), 
installer must ensure that the final installation will not emit more than 21 dBm EIRP power 
30-degrees above the horizon based on the antenna radiation pattern of the device.

Industry Canada statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the 
following two conditions: 

(1) This device may not cause interference; and (2) This device must accept any interference, 
including interference that may cause undesired operation of the device. 

Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. 
L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de 
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage 
susceptible de provoquer un fonctionnement indésirable. 
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential 
for harmful interference to co-channel mobile satellite systems;

(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the 
bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the 

Содержание DWL-8720AP



















Отзывы: