D-Link DWL-8600AP, Справочное руководство

Страница: 12 / 36

D-Link Unified Access Point CLI Reference Manual
8
© 2001- 2009 D-Link Corporation. All Rights Reserved
U
SING THE ADD
C
OMMAND
The “add” command allows you to add a new instance or group of instances of a class and has the following syntax:
add unique-named-class instance [ property value ... ]
add group-named-class instance [ property value ... ]
add anonymous-class [ property value ... ]
For example:
add mac-acl default mac 00:01:02:03:04:05
U
SING THE REMOVE
C
OMMAND
The “remove” command allows you to remove an existing instance of a class and has the following syntax:
remove unnamed-class [ property value . . . ]
remove named-class instance | all [ property value . . .]
For example:
remove mac-acl default mac 00:01:02:03:04:05
A
DDITIONAL
CLI C
OMMANDS
The CLI also includes the following commands for maintenance tasks:
For information about classes, instances, and properties, see “CLI Classes and Properties Reference” on page 20 .
Note: If you’re adding an instance to a unique-named class, you must assign the instance a name not already in
use by any other instance of that class. If you add instances to group-named classes, you can form groups by
creating instances and assigning them identical names. All instances of a group-named class that have the same
name form a group of instances.
Table 2: Additional CLI Commands
Command Description
save-running
The
save-running
command saves the running configuration as the startup configuration.
For more information, see “Saving Configuration Changes” on page 12 .
reboot The reboot command restarts the access point (a “soft” reboot).
factory-reset The factory-reset command resets the AP to factory defaults and reboots.
firmware-upgrade Use the firmware-upgrade command to upload a new AP image.
config Use the config command to upload or download the AP configuration file.
R
ev
ie
w
C
op
y