D-Link Systems, Inc.
5
DWL-8220AP Install Guide
Installing the Hardware
Cable Requirement
The Ethernet ports on the DWL-8220AP access point cannot
accept a CAT 5 cable that has an uneven sheath such as the
one shown below. The RJ-45 connector on the cable will not seat
properly in the receptacle on the access point. Use a CAT 5 cable
with an even sheath instead.
Suspended Ceiling Installation
Flush Ceiling Tiles
This procedure applies to T-bars that are 23.9 mm (15/16 inches)
wide.
DWL-8220AP
Mounting Template
Mounting Bracket
1.
Use the mounting template to cut a hole for the CAT 5 cable.
