D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access Point Скачать руководство пользователя

Страница: 6 / 37

DWL-8220AP User’s Manual

D-Link Systems, Inc.

Hardware Overview

Hardware Overview (LEDs)

LED

Appearance

Meaning

Health

Solid green

All the following are true:

• Management link with a switch is

operational.

• Access point has booted.

• Access point has received a

valid conﬁguration from a switch.

• At least one radio is enabled or is in

sentry mode.

Solid amber

Access point is waiting to receive

boot instructions and a conﬁguration

ﬁle from a switch.

Alternating green

Access point is booting and receiving

and amber

its conﬁguration ﬁle from a switch.

Radio 1/Radio 2

Solid green

A client is associated with the radio.

Blinking green

Associated client is sending or

receiving trafﬁc.

Blinking amber

Non-associated client is sending or

receiving trafﬁc.

Alternating green/amber Radio is unable to transmit. This state

can occur due to any of the

following:

• Excessive radio interference in the

environment is preventing the radio

from sending beacons.

• The radio has failed.

Unlit

Means one of the following:

• Radio is disabled.

• Radio is enabled, but no clients are

associated with the radio and there

is no trafﬁc activity.

Содержание DWL-8220AP - AirPremier Wireless Switch Dualband Access Point






































Результаты поиска

Содержание DWL-8220AP - AirPremier Wireless Switch Dualband Access Point

Отзывы:

Похожие инструкции для DWL-8220AP - AirPremier Wireless Switch Dualband Access Point

Бренды по названию

Популярные бренды

D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access Point, Руководство пользователя

Результаты поиска

Содержание DWL-8220AP - AirPremier Wireless Switch Dualband Access Point

Отзывы:

Похожие инструкции для DWL-8220AP - AirPremier Wireless Switch Dualband Access Point

Бренды по названию

Популярные бренды