D-Link DWL-2700AP - AirPremier Outdoor Wireless Access Point, Руководство пользователя

Страница: 112 / 128

11
DWL-700AP User’s Manual
D-Link Systems, Inc.
Troubleshooting
2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To
check this connection:
Right-click on the Local Area Connection icon in the taskbar>
select
View Available Wireless Networks
. The
Connect to Wireless Network
screen
will appear. Please make sure you have selected the correct available network, as
shown in the illustrations below.

Check that the IP address assigned to the wireless adapter is within the same
IP address range as the access point and gateway. Since the DWL-2700AP has
an IP address of 192.168.0.50, wireless adapters must have an IP address in the
same range, e.g., 192.168.0.x. Each device must have a unique IP address; no two
devices may have the same IP address. The subnet mask must be the same for all
the computers on the network.) To check the IP address assigned to the wireless
adapter,
double-click
on the
Local Area Connection icon
in the taskbar > select
the
Support tab
and the
IP address
will be displayed. Please refer to
Checking
the IP Address in the Networking Basics section of this manual.)
 If it is necessary to assign a
Static IP Address
to the wireless adapter, please refer
to the appropriate section in
Networking Basics
. If you are entering a
DNS Server
address you must also enter the Default Gateway Address. (Remember that if
you have a DHCP capable router, you will not need to assign a static IP address.
See
Networking Basics: Assigning a Static IP Address.)