16
Using the Configuration Utility with Windows OS
(continued)
Advanced
Ad-Hoc Channel:
All devices in the Ad Hoc
network must be set to the
same channel
Click
Apply
if you have made any changes
Data Packet Parameter:
Select the parameters here
Profile IP Settings:
You can
Enable
or
Disable
the
IP Settings
portion of your profile
here. If you select
Disable
you will need to
configure the IP Address
information each time you
connect to a network. If
you select
Enable
you will
maintain the same IP
Address information
each time you connect to
a network.
Select
Enable
or
Disable
Launch Utility on Startup:
Power Mode:
Disable
-this default setting consumes the most power
Enable
- this setting consumes the least power
Fragmentation Threshold:
This value should remain at its default setting of 2432. If you experience a
high packet error rate, you may slightly increase your Fragmentation
Threshold within the value range of 256 to 2432. Setting the Fragmentation
Threshold too low may result in poor performance.
This value should remain at its default setting of 2432. If inconsistent data
flow is a problem, only a minor modification should be made.
RTS Threshold: