D-Link DWC-2000, Быстрое руководство по установке

Страница: 2 / 48

2
E
N
G
LI
S
H
About This Guide
This guide gives step-by-step instructions for
setting up your D-Link DWC-2000 Wireless
Controller. Please note that the model you
have purchased may appear slightly different
from those shown in the illustrations.
The DWC-2000 Wireless Controller is a full-
featured wireless LAN controller designed for
medium to large network environments. The
controller has a range of network and access
point management functions, can control up to
64 access points by default, and up to 256 with
license pack upgrades.
The DWC-2000 can be upgraded with three
optional license packs:
• The DWC-2000-AP32/DWC-2000-AP32-
LIC License Packs allow management of
up to 32 additional access points.
• The DWC-2000-AP64/DWC-2000-AP64-
LIC License Packs allow management of
up to 64 additional access points.
• The DWC-2000-AP128/DWC-2000-AP128-
LIC License Packs allow management of
up to 128 additional access points.
The DWC-2000 can be upgraded multiple times
with license packs, enabling support for up to a
maximum of 256 access points.
Product Overview
Figure 1. Front Panel
Figure 2. Rear Panel
Item Part Description
A Reset button
System reset
B Power LED
Indicates if the wireless
controller is powered on
C Fan LED
Indicates the fan status
on the wireless controller
D USB ports (1-2)
These ports can support
various USB 1.1 or 2.0
devices
E Hard disk drive module
slot
Slot for the hard disk drive
module
F Gigabit LAN SFP ports
(1-4)
Connect to Ethernet
devices such as
computers, switches, and
hubs
G
Gigabit LAN RJ-45
ports (1-4)
Connect to Ethernet
devices such as
computers, switches, and
hubs
H Console port
Used to access the
Command Line Interface
(CLI) via an RJ-45 to
DB-9 console cable
I Power switch Powers On/Off the device
J Power outlet
Connects to the power
cord
Status LEDs and Ethernet Port LEDs
Figure 3. Ethernet RJ-45 Port LEDs
Figure 4. Ethernet SFP Port LEDs
The following table lists the name, color, status,
and description of each device LED.
Link
Speed
TX/RX
Status
Link Speed &
TX/RX Status
ABCD E
F G H
I J