5
D-Link DWA-50 User Manual
Section - Wireless Security
Configure WPA/WPA2 Passphrase
Using the D-Link Utility
It is recommended to enable WPA-PSK on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WPA-PSK passphrase being used.
1.
Open the Wireless Utility by double-clicking on the D-Link icon
in your system tray (lower-right corner of screen).
2.
Highlight the wireless network (SSID) you would like to connect
to and click
Connect
. If the network is using WPA-PSK, the
screen (as shown to the left) will appear.
3.
Enter the WPA-PSK passphrase exactly as it is on your wireless
router or access point. Click the
Show text in the password
field
box to see the passphrase. Unchecking it will hide it.
4.
Click
OK
to connect to the network. Allow up to 30 seconds to connect.
If you would like to create a new network and enter the WEP settings, refer to the next page.
Содержание DWA-520
Страница 1: ......
Страница 17: ...17 D Link DWA 520 User Manual Section 2 Installation Click Finish to complete ...
Страница 55: ...Ver 1 10 2007 10 05 ...