D-Link DVX-2002F, Руководство пользователя

Страница: 53 / 130

DVX IPPBX
52 / 130
General

Opermode : Set the Opermode for FXO Ports.

ToneZone : Select the tone zone of your country.

Ring Timeout(s) : FXO (FXS signaled) devices must have a timeout to determine if it should
hang up before the line is answered. This value can be tweaked to shortenhow long it takes
before DAHDI considers a non-ringing line to have hung-up.

Relax DTMF : Helps DTMF signal detection.

Send Caller ID After : Certain countries (UK) have ring tones with different ring tones
(ring-ring),which means the caller ID needs to be set later on, and not just afterthe first ring,
as per the default (1).

Echo Cancel : Enable/Disable software Echo Cancel algorithm.

Denoice :The denoise parameter will help on noise reduction of the noisy analog lines,
especially when gains have been increased on the lines.

Echo Training : Enabling echo training will cause the PBX system to mute the channel, send
an impulse, and use the impulse response to pre-train the echo canceller so it can start out
with a much closer idea of the actual echo. Value may be "yes", "no", or a number of
milliseconds to delay before training (default = 400). This option does not apply to hardware
echo cancellers.
4.1.3 Global SIP Settings
Global SIP settings allow you to configure some general and advanced options for the IP-PBX
system global SIP preferences. Navigate to web menu
Advanced->Options->SIP Settings
.
General