D-Link DVX-2002F, Руководство пользователя

Страница: 52 / 130

DVX IPPBX
51 / 130
These options are used to teach the DVX IPPBX system how to detect caller identity(caller ID)
from the PSTN lines on FXO ports.

Caller ID Detection : Enable/Disable Caller ID Detection.

Caller Name :In some countries/regions caller name can be passed through the PSTN lines,
by enabling this option the caller name will be received by the IPPBX system along with the
caller ID.

Caller ID Signaling : The signaling type applied on the PSTN lines to pass caller ID.
Bell-US—Also known as BellcoreFSK. Used in the Canada, China, Hong Kong and US.
DTMF—Dual Tone Multi-Frequency. Used in Denmark, Finland and Sweden.
V23—Mostly used in UK.
V23-Japan—Mostly used in Japan.
 Caller ID Start : Defines whenthe caller ID starts.
Ring—Caller ID starts when a ring is received.
Polarity—Caller ID starts when polarity reversal starts.
Polarity(India)—Can be used in India.
Before Ring—Caller ID starts before a ring received.

CID Buffer Length : The buffer length can be used to store caller ID info.

Ring Debounce :Sets the minimum time in milliseconds to debounce extraneous ring events.

DTMF Hits Begin :Sampling matching value of DTMF caller ID digits, you can choose 1 to 5
digits been matched then to consider it as part of the Caller ID.

DTMF Miss End :Sample matching value of DTMF caller ID digits, you can choose 1 to 5 digits
been mismatched then to consider it’s not part of the caller ID.

Detect Caller ID After :Sets the IPPBX to detect Caller ID after how many rings been detected.