D-Link DVG-N5402FF Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 115

background image

DVG-N5402FF User’s Manual

SETUP

D-Link Systems, Inc.

25

SETUP

→

VoIP Setup

Proxy Server IP/Domain:

Enter the IP address or URL (Uniform Resource Locator) of SIP proxy server or

soft switch.

Proxy Server Port:

Enter the SIP proxy server’s listening port for the SIP in this field. Leave this field to the

default if your VoIP Service Provider did not give you a server port number for SIP.

Proxy Server Realm:

Enter the realm for SIP proxy server. It is used for authentication in a SIP server. In

most cases, the VoIP Router can automatically detect your SIP server realm. So you can leave this option
blank. However, if your SIP server requires you to use a specific realm you can manually enter it in.

TTL (Registration interval) [10-7200 s]:

Enter the desired time interval at which the VoIP Router will

report to your SIP proxy server.

SIP Domain:

Enter the SIP domain provided by your VoIP Service Provider. (Note some SIP proxy servers

might not require this.) If you enable “Uses Domain to Register”, the VoIP Router will register to the SIP
proxy server with the domain name you filled in. Otherwise, the VoIP Router will register to a SIP proxy
server with the IP it resolves.

Use Domain to Register:

Check the box to use Domain to register with SIP proxy server. The VoIP Router

is registered to the SIP proxy server with IP address if un-ticked.

Note: Proxy Server Realm

,

SIP Domain

and

Use Domain to Register

are the parameters provided

by VoIP Service Provider. If you fail to make a call, please contact your VoIP Service Provider.

Bind Proxy Interval for NAT:

Check the box to keep the binding exist by sending packets when the VoIP

Router is behind a NAT and SIP proxy server is not able to keep the binding.

Initial Unregister:

Check the box to send an unregistered message initially by the VoIP Router and then it

will perform a general register process.

Unregister All Contacts:

DVG-N5402FF will fill “*”(a star) in Contact field in un-register request to release

all registered accounts in this DVG-N5402FF.

Keep SIP Auth:

DVG-N5402FF keeps the last register SIP MD5 authentication information and re-use it for

next register request.

Support Message Waiting Indication (MWI):

It is used to enable/disable Message Waiting Indication. It is

available only when Voice Mail Service is available from the VoIP Service Provider.

MWI Subscribe Interval:

It is used to set the subscribe time for the VoIP Router to check the voice mail.

«
...
23
24
25
26
27
...
»

Содержание DVG-N5402FF




















































































































Отзывы:

Нет отзывов

Похожие инструкции для DVG-N5402FF

Бренд: TRENDnet Страницы: 2

Бренд: Chantry networks Страницы: 4

Бренд: YATO Страницы: 96

Бренд: TP-Link Страницы: 3

Бренд: Z-Com Страницы: 23

NanoStation 5AC Loco

Бренд: Ubiquiti Страницы: 18

Бренд: Audio Technica Страницы: 36

Бренд: Aztech Страницы: 20

Бренд: Aerohive Страницы: 12

Бренд: HPE Страницы: 4

Бренд: North Страницы: 3

Бренд: AirLive Страницы: 4

Бренд: Teltonica Страницы: 141

Бренд: Xiaomi Страницы: 3

Бренд: Ebyte Страницы: 21

Бренд: Zalip Страницы: 64

Бренд: Orbic Страницы: 43

CP880-B LTE CPE

Бренд: BTI Wireless Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды