Tools > Admin
At this page, the
DVG-G1402S administrator
can change the system
password. There are two
accounts that can access the
Broadband Router’s
Web-Management interface.
They are admin and user.
Admin has read/write access
while user has read-only
access. User can only view
the settings but cannot make
any changes.
Web Port Number
The port number used to access the Broadband Router. The
default port number for web management is 80.
WAN Access Control
WAN access control allows remote management via the
DI-624
to be configured from the Internet by a web browser. A
username and password are still required to access the
Web-Management interface. In general, only a member of your
network can browse the built-in web pages to perform
Administrator
tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host. Click the
radio button to
Enabled
to activate this feature.
Enter the password, admin, here and the same password in the
Confirm Password field. This will be the password that the
administrator will use to gain access to the configuration menu
of the device. There is no default password for this device.
Administrator
Password
53
