Advanced > Routing > Static Route
The Routing table, shown to
the right, allows you to enter
static routes between
computers on both the WAN
(Internet) and your LAN.
IP Address
Enter the IP Address of the subnet or device where packets are
to be routed.
Subnet Mask
Enter the subnet mask corresponding to the IP address entered
above
.
Gateway
Enter the IP address of the gateway used for packets that are
to be routed to the IP address entered above.
Interface
Select the WAN (Internet) or LAN interface.
Metric
Enter the number of hops (the number of routers) that packets
will be allowed to cross when being routed to the IP address
entered above.
State
Use this drop-down menu to
Enable
or
Disable
this route.
49
