D-Link Systems, Inc.
11
DVG-G1402S Install Guide
Configuration
If you selected PPPoE, enter your
username and password supplied by
your ISP.
Note: You will no longer use the PPPoE software that is installed on your
computer. Make sure you disable or uninstall the software.
Click
Next
.
Setup is finished. Click
Restart
to
reboot the DVG-G1402S. Once the
adapter is finished rebooting, turn on
your modem and allow up to 2 minutes
to connect to your ISP.
Click
Restart
.
Hardware configuration is complete! If your VoIP service is already activated,
you can make phone calls now.
If you selected Static, enter the
IP address, subnet mask, default
gateway, and DNS server(s)
supplied by your ISP.
Click
Next
.
Configuration (continued)
