DVG-5102S
User’s Manual
MAINTENANCE
D-Link Systems, Inc.
10
2-1 SETUP
2-1-1 Internet Setup
WAN (Wide Area Network) Settings are used to connect to your ISP (Internet Service Provider). The
WAN settings are provided to you by your ISP and oftentimes referred to as "public settings". Please
select the appropriate option for your specific ISP.
IP Configuration (Setting WAN Port)
There are five methods of obtaining a WAN port IP address:
1.
DHCP, which means a Dynamic IP (Cable Modem)
2.
Static IP
3.
PPPoE (dial-up ADSL)
Methods for using DHCP and PPPoE for obtaining an IP address may vary. If you are not familiar with
creating a network connection, please contact your local ISP.
After selecting the suitable option, click
Accept
at the bottom of the screen to save the settings.
You need to save the changes and restart the VoIP TA to make the changes active. Saving the settings:
Click
MAINTENANCE
and select
Save/Restart
in
System
from the left menu. Tick
Save Settings
and
Restart
, then click
Accept
. Wait for about 40 seconds before the VoIP TA obtaining an IP address by
the method you selected.
Note:
When the system has obtained a new IP address, and you are using a WAN port to enter the
Web Configuration Screen, the new IP address has to be used before you can get connected to the
VoIP TA. The same principle applies to the next two settings.
SETUP
→
Internet Setup
SETUP
→
Internet Setup
