D-Link DVG-3104MS - VoiceCenter PSTN Gateway, Быстрая установка

Страница: 5 / 8

D-Link DVG-3104MS Quick Install Guide
The DVG-3104MS Gateway translates incoming phone calls so they
can be sent over your organization’s LAN, and translates outgoing
calls into the format used by traditional phone service.
Note: Avoid disabling your existing phone service while setting up
VoiceCenter
™
. If you have an alternative jack available, use it to set
up and test the VoiceCenter phone system.
Plug the power adapter into an AC outlet or power strip and plug the
other end into the AC input on the back of the gateway. The power
LED will light up to indicate proper connection.
Connect one end of the Ethernet cable to the LAN Port on the back
of the gateway and connect the other end of the cable to your Local
Area Network via switch or hub. The LAN LED will light up to indicate
proper connection.
Connect the phone cable to an available PSTN (FXO) Port on the
back of the gateway and connect the other end to a phone jack.
When you have made all the connections to the gateway, it should
look like the diagram below:
Installation