36
Configuration Using a Console
Configuring the VoIP Gateway Using Telnet
Once you have set an IP address for your device, you can use a Telnet pro-
gram (in a VT-100 compatible terminal mode) to access and configure it. Most
of the screens are identical, whether accessed from the console port or from a
Telnet interface.
Initial Screen, First Time Connecting to the device
First Time Connecting to the VoIP Gateway
First make the console connection to the device and then power it on. If your
terminal (or terminal emulation program) is properly configured according to
the specifications defined above, you will see the POST test and the boot up
process. After the process is completed, you will see the window shown be-
low.
Initially, the VoIP gateway has a default Username and Password: admin. To
log in, enter “admin” for the usernamd and passowrd and click <Enter>. The
following window will be displayed
