34
Web-based Management (continued)
Factory Reset
Before performing a
Factory Reset, be
absolutely certain
that this is what you
want to do. Once the
reset is done, all of
the device’s settings
stored in NV-RAM
will be erased and
restored to values
present when the
device was
purchased.
Click on
Reset to Factory Default
in this window to reset the NV-RAM to the
default values that were present when you purchased the device.
Note:
After performing the Factory Reset, make sure to redefine
the IP settings for the device. Then perform a Save &
Restart System on the device. After these procedures are
performed, your Factory Reset is complete.
After the settings
have been saved to
NV-RAM, they will
become the default
settings for the
device, and they will
be used every time it
is powered on, reset
or rebooted. The
only exception to this
is a factory reset,
which will clear all
settings and restore
them to their initial
values, which were present when the device was purchased.
Click
Restart
to save and reboot the system.
Save & Restart System
