DSS-24 10/100 Auto Negotiation Switch User’s Guide
Introduction
3
Front Panel
The DSS-24 is designed for management at a glance. The LEDs on the front panel
of the DSS-24 allow you to monitor performance at a glance. It is not necessary to
connect to the DSS-24 in order to check performance or verify that a port is
working.
There are 24 ports located on the front. Each of the ports can be used for network
connection. The MDI-II Uplink port and port 1 are connected. You cannot use
both ports simultaneously.
The MDI-II port is used to connect to switches and hubs that do not have uplink
ports.
Figure 1: DSS-24 Front Panel
Link/
Collision
100 Mbps/
10 Mbps
13
17
21
14
18
22
15
19
23
Link/
Collision
100 Mbps/
10 Mbps
1
2
3
4
5
6
7
9 10
11 12
Power
DSS-24
D-Link
17x
18x
19x
20x
21x
22x
23x
24x
Power
Link/ Act/ Collision LEDS
MDI-II Uplink Port
MDI-X Ports
100Mbps/10Mbps
10/100 Fast Ethernet Switch
Switch II
