D-Link DSN-5210-10 - xStack Storage Area Network Array Hard... Скачать руководство пользователя

Страница: 11 / 52

DSN-5000 series Hardware Reference Guide

1.1 Models

The xStack Storage DSN-5000 series storage array is available in various models. The models
differ according to the speed and host network interface. Table 1-1 lists the xStack Storage DSN-
5000 series array models.

Table 1-1. DSN-5000 series Storage Array Models

Model

Description

DSN-5110-10 (single controller) System

DSN-510 (additional controller)

Number of host network connections: Four RJ-45 ports

Speed: 1 Gbps

Maximum number of internal SATA or SAS drives: 12

Maximum number of total SATA or SAS drives (with DSN-5000-10 Expansion Arrays): 48

Maximum amount of system memory: 4 GB

Maximum amount of buffer (cache) memory: 4 GB (1GB Standard)

Single or Dual controllers are allowed

A DSN-510 controller can be installed in the empty bay of the DSN-5110-10 for High Availability

DSN-5210-10 (single controller) System

DSN-520 (additional controller)

Number of host network connections: Eight RJ-45 ports

Speed: 1 Gbps

Maximum number of internal SATA or SAS drives: 12

Maximum number of total SATA or SAS drives (with DSN-5000-10 Expansion Arrays): 84

Maximum amount of system memory: 4 GB

Maximum amount of buffer (cache) memory: 4 GB (2GB Standard)

Single or Dual controllers are allowed

A DSN-520 controller can be installed in the empty bay of the DSN-5210-10 for High Availability

DSN-5410-10 (single controller) System

DSN-540 (additional controller)

Number of host network connections: One optical XFP transceiver host network connection

- XFP transceiver sold separately

Speed: 10 Gbps

Maximum number of total SATA or SAS drives (with DSN-5000-10 Expansion Arrays): 84

Maximum amount of system memory: 4 GB

Maximum amount of buffer (cache) memory: 4 GB (2GB Standard)

Single or Dual controllers are allowed

A DSN-540 controller can be installed in the empty bay of the DSN-5410-10 for High Availability

- XFP transceiver sold separately

DSN-5000-10 (single I/O module)
Expansion

DSN-500 (additional I/O module)

This is an expansion array with a single I/O module that is used with a DSN-5110-10. DSN-
5210-10 or DSN-5410-10 primary array

Maximum number of SATA or SAS drives: 12

Each I/O module provides two SAS expansion ports

Single or Dual I/O modules are allowed

A DSN-500 I/O module can be installed in the empty bay of the DSN-5000-10 for High
Availability

Содержание DSN-5210-10 - xStack Storage Area Network Array Hard...





















































Результаты поиска

Содержание DSN-5210-10 - xStack Storage Area Network Array Hard...

Отзывы:

Похожие инструкции для DSN-5210-10 - xStack Storage Area Network Array Hard...

Бренды по названию

Популярные бренды

D-Link DSN-5210-10 - xStack Storage Area Network Array Hard..., Справочник по аппаратуре

Результаты поиска

Содержание DSN-5210-10 - xStack Storage Area Network Array Hard...

Отзывы:

Похожие инструкции для DSN-5210-10 - xStack Storage Area Network Array Hard...

Бренды по названию

Популярные бренды