D-Link DSN-4100 Series, Быстрое руководство по установке

Страница: 3 / 36

DSN-4000_Series Quick Installation Guide
3
E
N
G
LIS
H
4. Install the Enclosure and the Hard Drive
The DSN-4100/DSN-4200 is a full iSCSI storage system, supporting up to 80 3½ inch SAS or SATA hard
disks drives. The Enclosure Status and Drive Status LED’s are on the front of the unit. The two Power
switches, Reset button, Mute Audio Alarm button, network data ports, and port speed and activity LED’s
are on the rear panel.
Drive Carriers
FrontView
Rear View (8-port configuration shown)
Enclosure Status LED’s
Power Switches
Management Port
iSCSI Data Ports Reset & Mute Buttons
SAS Expansion
Port
To install the hard drives into the drive carriers:
A. Remove each empty drive carrier from the enclosure by sliding the latch toward the left, pressing button
and pulling the latch to open the disk tray door.
Release Latch
Button
Driver Carrier