20
Chapter 3 Installing the DSN-2100 Storage System
3.3
Items Supplied by the User
Table 3-1 lists the additional items you must supply to perform the DSN-2100 storage system
installation. All users must provide the items in the first row of Table 3-1. Thereafter, the
additional items required for installation depend on the user category into which you fit.
Table 3-1. User-Supplied Items to Perform the DSN-2100 Storage System Installation
User Category
User-Supplied Items
All Users
A PC with a Network Interface Card (NIC) that will act as the iSCSI initiator. (See Note 1.)
A PC with a NIC and Internet access that will access the management console. (See Note 1.)
One or more available AC outlets not controlled by a wall switch.
Optional: An Ethernet switch and Ethernet cable. If you want to use the DSN-2100 storage
system’s Link Aggregation feature, the switch must support LAGs.
An IP address for each DSN-2100 storage system host connection RJ-45 data port that will
connect to your SAN.
An Ethernet cable for each DSN-2100 storage system host connection RJ-45 data port that will
connect to your SAN (the DSN-2100 storage system auto-senses the cable type used).
Rack-Mount Users
A standard NEMA-compliant 19-inch rack.
Additional Mounting hardware for specific rack being used.
Note 1: For convenience, one PC with three installed NICs can be used instead of separate PCs. In this configuration, one NIC
connects to the DSN-2100 storage system management port, a second NIC connects to the Internet, and a third NIC is used
with the iSCSI initiator.
