D-Link DSN-1100 xStack Storage Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 42

D-Link DSN-1100 xStack Storage Скачать руководство пользователя страница 3

DSN-1100 Hardware Reference Guide

iii

Safety Information

After completing the configuration of your DSN-1100 SAN array, please operate
the unit with its front bezel door closed. This will help alleviate fire danger
during normal SAN array operation.

There is a danger of a new battery exploding if it is incorrectly installed.
Replace the battery pack only with the same or equivalent type recommended
by the manufacturer. Do not dispose of the battery along with household waste.
Contact your local waste disposal agency for the address of the nearest battery
deposit site.

This product also uses a lithium coin cell battery. The lithium coin cell battery is a long-life
battery, and it is very possible that you will never need to replace it. However, should you
need to replace it, consult your service documentation. Do not dispose of the battery along
with household waste. Contact your local waste disposal agency for the address of the
nearest battery deposit site.

Following are the safety agency certifications that the xStack Storage enclosure has met:

CSA 60950-1

UL 60950-1

IEC 60950-1

EN 60950-1

Compliance Information

FCC Class A

CE Class A

C-Tick Class A

VCCI Class A

Notice of Export Controls

Export of technical data contained in this document may require an export license from the
United States government. Please contact D-Link Systems, Inc. for any export compliance
questions.

«
1
2
3
4
5
...
»

Содержание DSN-1100 xStack Storage











































Отзывы:

Нет отзывов