D-Link DSN-1100-10 - xStack Storage Area Network Array Hard..., Справочник по аппаратуре

Страница: 9 / 42

DSN-1100 Hardware Reference Guide 9
Chapter 1 Introduction
The DSN-1100 storage system is an intelligent, high-performance multiple Gigabit Ethernet
storage solution designed for small businesses that want to improve the reliability,
availability, serviceability, and performance of their storage systems. It provides a range of
benefits and features from its ability to use familiar, proven, and widespread networking
technologies like IP and Ethernet for storage solutions.
Based on an Internet Protocol-Storage Area Network (IP-SAN) architecture, the DSN-1100
storage system is built around an iSNP8008 System-On-A-Chip, with the following features:

Up to 5 internal Serial Advanced Technical Attachment (SATA) drives

Up to 512 MB of system memory

Up to 1 GB of buffer (cache) memory

Four 1GbE local-area network (LAN) connectors accessed via the back panel

A 10/100 Mbps management port

An RS-232-C DB9 diagnostic port for troubleshooting purposes
Complete configuration and management are available through the intuitive, graphical-
based xStack Storage Management Center.
For the latest information about supported drives, consult the
Interoperability Matrix found on the D-Link Support Web site:
support.dlink.com
1.1 Model
The DSN-1100 storage system is presently available as a single model.
Table 1-1. DSN-1100 Model Number
Model Host Network Interface Maximum Number of
Internal SATA Drives
DSN-1100-10 Four 1GbE data ports 5