10
D-Lnk DSM-210 User Manual
Configuration
This section will show you how to configure your new D-Link Wireless Internet Photo Frame. If you are not going to
connect your DSM-210 to a network or to the Internet, and simply want to display pictures from the internal memory,
memory card, and/or from an USB thumb drive, then skip to page 16.
For the quickest and easiest installation, it is highly recommended that both DHCP and SSID Broadcast are enabled on
your home network. If not, then you will need to manually enter the network settings and/or the SSID of your wireless
network (refer to page 15). Most networks have DHCP and SSID broadcast enabled to allow new devices to find the
wireless network and connect automatically.
DHCP (Dynamic Host Configuration Protocol) allows network settings required
by the DSM-210 to be set automatically.
If your router or access point supports Wi-Fi Protected Setup (WPS), skip
to page 12.
To bring up a list of available wireless networks, use the arrow keys on the
remote control and navigate to the
Setup
icon. Select
Wireless Settings
and press
Enter
.
A list of available networks will appear in the left pane. Select your wireless
network and press
Enter
.
Connect to a Wireless Network
Содержание DSM-210 - Wireless Internet Photo Frame
Страница 1: ......