D-Link DSL-G684T Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 121

background image

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

-

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user
may be required to take adequate measures.

«
1
2
3
4
...
»

Содержание DSL-G684T


























































































































Отзывы:

Нет отзывов

Похожие инструкции для DSL-G684T

Univerge SV8100

Бренд: NEC Страницы: 44

Бренд: Nayar Systems Страницы: 37

Бренд: Patton electronics Страницы: 51

Transportation FiberinMotion

Бренд: Radwin Страницы: 122

Бренд: QNAP Страницы: 39

Бренд: Supermicro Страницы: 24

Бренд: FS Страницы: 19

Бренд: THOMSON Страницы: 212

Бренд: Ozenda Страницы: 116

301300U - Ethernet Disk NAS Server

Бренд: LaCie Страницы: 62

Бренд: VCS Страницы: 118

Бренд: Observint Страницы: 117

Бренд: AIC Страницы: 101

ADSL Ethernet & USB Combo Router Lynx L-510

Бренд: Starbridge Networks Страницы: 59

Бренд: Matrix Switch Corporation Страницы: 54

Бренд: Beckhoff Страницы: 84

Routers and Switches

Бренд: Allied Telesis Страницы: 15

Бренд: Allynk Technology Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды