10
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 7 – Set Wireless Connection
You will now be asked if you would like to enable your Wireless Radio. The
wireless radio is what the router uses to provide wireless networking
functionality to your wireless computers. If you would like to turn the radio on,
select Enabled to turn it on, otherwise select Disabled to turn the radio off.
You can turn the radio on or off at a later date by referring to your User Manual.
Once you have completed this step, click Next to continue. If you Enabled
your wireless radio, proceed to step 7A on Page 10. If you Disabled your
wireless radio, proceed to Step 8 on Page 11.
Select your
Wireless Radio
Preference
Click
Next
to
continue
