DSL-6740U
VDSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Configuring via Web-based Interface
To change the operating parameters of a LAN port of the router, place the mouse pointer on the
relevant LAN port and click the
Setup speed and stream
line in the menu displayed (the line is
not available if the LAN port is used as the WAN port).
Figure 85. The page for changing parameters of the router's LAN port.
On the opened page, you can specify the following parameters:
Parameter
Description
Duplex
Data transfer mode. This parameter defines the data transfer mode
for a device connected to the selected LAN port of the router.
•
Half
– half-duplex mode
•
Full
– full-duplex mode.
If you have selected the
Auto
value of this drop-down list, the router
itself sets the data transfer mode.
Bitrate
Data speed (in bytes). If you have selected the
Auto
value of this
drop-down list, the router itself sets the data speed.
Port
The name of the LAN port.
Status
The state of the router's LAN port.
•
Connected
(green light): the port is used (a device is
connected to the port of the router, the connection is on).
•
Disconnected
(red light): the port is not used.
Enable
Select the checkbox if you want to enable the LAN port.
Page
114
of 158
